To manufacture and sell all multipurpose plastic seals in accordance with established processes and procedures to satisfy customer needs, expectations and desires through continual improvement of quality management system and training.

Various Type of Testing

 

A. Visual Check :
The workmanship and other features as mentioned as per our literature.
B. Dimensional Check :
As per approved drawing
C. Boiling water test :
The seal shall be immersed in the boiling water for more than one hour and there shall not be any affect on the seal and the seal shall remain in intact condition. Even, with the help of any sharp instrument, pulling with puller i.e. by applying mechanical force, the seal shall not come out from the female part. In case, it comes out, the same shall damage the seal, so that it cannot be re-used.
D. Pulled out test :
After locking the seal, if the seal is pulled with mechanical force with the help of puller or any other instrument, sharp instrument, etc. under normal condition, the seal shall not be unlocked without any damage.
E. Seal Wire :
In cases that if someone tries to pull the seal wire and in any of the tests mentioned at Sr. No. c, d and f, then the male / female portion of the seal should get damaged and the same can be seen visually being a transparent one.
F. Chemical test :
The seal shall be kept in the concentrated acid for minimum one hour, the same shall remain in intact condition and on trying to unlock the seal, and the same shall be damaged.

 

In short, if the seal is tested for any of the above tests, in no condition, it should be opened without damaging the seal. In case, it is opened, the seal shall have sufficient tamper evidence.

 

Packing Quality

We shall supply each 100 seals in numerological order i.e. arranging serially as per serial numbers and, tied with the steel wire forming a loop and the same shall be packed in polythene bag with labels on it furnishing Sr. No. of seal and Name of the Region. 2500 Nos. shall be packed in one corrugated box

 
 
 

Click for Zoom

 


Home | Profile | Product | Quality | Inquiry | Contact Us | Photo Gallery

Copyright © 2008, ATLAS PLASTIC All Rights Reserved.
Powered by : #1 Vinayak InfoSoft - #1 Web Designing :: Web Design Outsourcing Company


Home Company Profile Products Quality Control Inquiry Form Contact Address